Rendered at 14:26:12 GMT+0000 (Coordinated Universal Time) with Cloudflare Workers.
howdyhowdy 48 seconds ago [-]
I thought DMR and Venice were supporting memory encryption by default. With the keys living on the CPU side and no standards for key sharing, I wonder how this will gain traction.
bob1029 2 hours ago [-]
The tradeoff with putting the compute in the memory is that you have to know exactly where the dependent information will be at all times. Most problems do not fit this pattern very well. AI, gaming and crypto being the most obvious exceptions. It is incredibly constraining to develop applications using specialized hardware like this. You might as well spin out an ASIC for whatever it is you are doing. All 3 applications noted above eventually got their own flavors.
I think the Von Neumann bottleneck is mostly a feature. The fact that communication of information across distances is expensive should not be immediately assumed to mean that it is universally flawed to do this. You are paying for something when you use all those joules. I'd argue we are usually wasting our energy with regard to information communication (e.g., lighting up a network interface & copper because we couldn't be bothered to use SQLite), but other times this stuff is fundamentally required for practical solutions to exist.
po1nt 7 minutes ago [-]
I think you could do many performant things without any involvement of software. For example you could do AVX on RAM. The CPU would recognize PID RAM and offload AVX instructions to the module.
Then, by simply asking for a special memory address you could have access to registers/regions within PID RAM that serve as a result region.
Let's say you would need to run a sum over megabytes of data like for accounting. You could just ask RAM to do it and load just the result. The bandwidth would could be 8x higher and software could stay the same.
Doing scalar operations, frequent dereferencing and similar would not get much peformance benefit in many cases, as loading and accessing CPU cache is often much faster. But simple vector operations over large data could be massive.
Having accelerators on RAM like for jpeg compression, audio decoding or mass data operations could be beneficial but you would need to be careful with heat dissipation.
Personally I'm a big fan of the "in-ram accelerator" idea especially for server space. Doing fuzzy search in RAM could be massive performance improvement.
Eridrus 52 minutes ago [-]
In a world where AI is writing all of the code, the difficulty of the task may no longer be a blocker.
trollbridge 13 minutes ago [-]
Indeed. SIMD type code used to be too hard for me to write very often, but now it’s easy to crank out tons of it.
jeffbee 13 minutes ago [-]
There are fundamental issues here and I think the article only touched on a few. On the software side this completely blows up the whole virtual memory concept. We will need different operating systems.
samuelknight 3 hours ago [-]
I saw them present a similar concept at Hot Chips in 2020 or 2021. It's still a cool idea, however people should remember that there are like 20 of these exotic accelerators designs pitched at trade shows every year that go nowhere.
tesnorindian 2 hours ago [-]
In memory compute has been in talks since LLMs took up. I remember few flocks were trying to get RISC V cores in the memory like these papers
Whilst processing in memory is clearly the future, I am unconvinced by this implementation.
Matrix multiplication involves getting every entry of the input and output matrices to be at the same multiplier at the same time. (Ie. N^2).
To do that, a lot of data movement needs to happen. Movement is the main thing - the multiplication and addition is a sideshow as far as energy and silicon space is concerned. You need a 'around the chip' ring shift register to pass every element of one matrix past every element of the other.
zozbot234 4 hours ago [-]
"Movement is the main thing" is precisely why pursuing compute-in-RAM makes some sort of sense to begin with. But DRAM fabrication processes are quite specialized and do not perform well with pure compute logic. The overall profile of this thing will arguably be similar to a rather weak NPU, though with much better memory bandwidth - one key limitation, as with NPUs, will be the bespoke programming model and lack of support for the latest compressed/quantized number formats, which heavily limits the usefulness of being able to access memory directly. GPUs, even weak iGPUs, can dequantize/pad parameters on the fly which adds a lot of flexibility - and expose standard, well understood compute capabilities via CUDA, Metal or Vulkan. This is not quite comparable unfortunately.
danmaz74 4 hours ago [-]
Given how important matrix multiplication with a huge number of fixed parameters is becoming, there is an enormous incentive to design much more efficient architectures where this very simple compute is colocated with memory. Inference cost would come down a lot.
dotancohen 3 hours ago [-]
Exactly where I see this going as well. Sure, a smartphone might be a nice place to introduce such tech. But matrix multiplication is literally where all non-labour jobs are going - this is the bedrock for efficient (time, energy) machine learning and inference.
If AI really is going to eat all our jobs, then matrix multiplication in memory is almost a requirement.
1 hours ago [-]
convolvatron 43 minutes ago [-]
you're absolutely correct that pim without a real discussion about how that works in a broader communications context is kind of useless.
what I find strange is the adoption of a standard synchronous dram interface. that's a horrible left over piece of architecture that severely constrains the applicability of this device. control flow on the dram side can't initiate any transactions on its own, or respond after work has been done - its like usb, except with a hard limit on the response.
that severely limits the utility of the in-memory processors to doing things like encryption and compression - but even then those impose delays that effect the consistency model across that interface.
stinkbeetle 4 hours ago [-]
> Whilst processing in memory is clearly the future
How clear is that? The idea has been around for about 60 years, and many attempts made by people who thought the same thing. Maybe this time it'll be the future.
trentor 3 hours ago [-]
Because now the usecase fits the needs.
OptionX 4 hours ago [-]
So instead of putting more cache on the cpu you just put the cpu on the cache.
dotancohen 3 hours ago [-]
Sort of, but the cache architecture is replaced with memory architecture. But you could look at it either way.
pragma_x 5 hours ago [-]
What I find amusing about moving compute to a RAM bank is it _almost_ resembles where we were with ISA-based extended RAM back in the 1980's. Some cards featured a CPU that took over the whole system and/or functioned like an upgrade. Others were a "computer on a card" that provided other features. I think this goes to show how cyclic tech can be. So, something like Samsung's invention here might have gained traction, as overcoming the slow PC ISA bus would have been a huge accelerator, kind of like where we are now.
consp 6 hours ago [-]
So you basically dispose of cache for the memory region used? I wonder what the offsets of the cache misses is going to be in practice (the article addresses it but there is no solution/impact given by samsung).
manmal 6 hours ago [-]
I guess you also get very high bandwidth that way? I‘m not sure that would come for free though.
WithinReason 5 hours ago [-]
It comes at a cost of a fragmented memory space, which is fine for some applications, like LLMs
PunchyHamster 6 hours ago [-]
if your working set fits in cache PIM is irrelevant
yvdriess 5 hours ago [-]
Caches are important for cpu core performance even when the the working set doesn't fit.
reliabilityguy 7 hours ago [-]
Interesting that Samsung still pursues PIM. IIRC they had a paper in ISCA21 or 22 where they showed HBM2 module with PIM, which back then impressed me quite a lot.
That being said, I am not sure what’s the killer application for this technology, and without such application adoption is unlikely.
xyzzy123 7 hours ago [-]
As I understand it, the killer app is llms. You could run MACs directly in RAM, offloading a lot of work from CPU and cutting down on insane (external) memory bandwidth required.
Imagine (this is a fantasy pitch but potentially achievable for some use cases) wanting to run a larger llm and all you have to do is buy more RAM so it fits.
reliabilityguy 4 hours ago [-]
> You could run MACs directly in RAM
Sure, MACs are nice. However, unless there other, PIM-specific/optimal, algorithms, regular matrix multiplication algorithms like tiling-based won’t work here I think — how would the tile be shared? By doing read/write all the time?
embedding-shape 6 hours ago [-]
> Imagine (this is a fantasy pitch but potentially achievable for some use cases) wanting to run a larger llm and all you have to do is buy more RAM so it fits.
Isn't this how it works today already? Granted you wanted to run it on RAM rather than VRAM.
petu 5 hours ago [-]
Yes, but running out of RAM is impractical due to low memory bandwidth.
According to the article/Samsung RAM dies inside can support way higher bandwidth than they expose, they're limited by external interface / bus width:
> Together, they can utilize the chip’s internal bandwidth across all 16 banks, which comes out to 614 GB/s. For comparison, regular DRAM accesses can hit two banks in parallel and max out at 76.8 GB/s.
And that's just for single 64-bit IC. So way faster and more power efficient.
dannyw 2 hours ago [-]
You can scale with more memory channels. Workstation/server platforms go up to 12 or 16 channels if I remember correctly.
Consumer platforms have been stuck at dual channel for decades; most of it I attribute to intentional product segmentation. I'm hoping that LLMs might change eventually for an upcoming consumer platforms; going to 4 channel would be really nice.
amelius 5 hours ago [-]
You: "AI, please write me $COOL_APP."
AI: "Sorry, all the hardware is made for running AI."
eru 3 hours ago [-]
We can run Doom on everything. Surely we can run some interesting apps on hardware that's originally made for AI. (One big moment for AI was when people figured out how to run it on hardware originally meant for Doom's successors.)
WithinReason 5 hours ago [-]
[dead]
imtringued 4 hours ago [-]
The idea is this:
You have an eight socket server with 96 memory slots, you add 96x PIM memories into the server (optimistic), load all the LLM parameters or KV cache in RAM and exclusively let it perform GEMV and let it rip.
614 GB/s x 96 = 58,944 GB/s.
Alternatively, the memory is used for embedded inference tasks. You can now upgrade from the limited single or two digit MB SRAM accelerators to reasonably fast single digit gigabyte models. Without MoE you could reach 100 tokens per second with an 8B fp8 model on a single channel. With MoE you might break 500 tokens per second.
hoppp 3 hours ago [-]
And now the 96 memory slots need individual cooling.
netfortius 7 hours ago [-]
> That being said, I am not sure what's the killer application for this technology...
Build it, and they will come ;)
harshaw 3 hours ago [-]
This is somewhat orthogonal to the article, but the whole bubble on AI data centers seems to presume that the need for compute is so massive that it far exceeds the expected optimizations we would expect with at scale inference (PIM, ASICs, etc). I would expect that there is a set of optimizations like this one (or variations) that would someone negate the buildout. But it's not really discussed.
Tenoke 3 hours ago [-]
There's been a ton of optimizations already, it hasn't remotely reduced demand even temporarily. More efficiency just makes the compute have even higher ROI per $ and watt spent.
roryirvine 3 hours ago [-]
With sufficient optimisation, there ought to be a tipping point beyond which local inference is good enough. And, sure, datacentre compute will still be needed for training but one of the biggest current uses will begin to taper off.
The question really is how soon we reach that tipping point, and whether it's before or after the current bubble runs out of steam for some other reason.
Tenoke 3 hours ago [-]
>there ought to be a tipping point beyond which local inference is good enough
There's no such ought really. Even at current levels you'd need like a 100x gain from here to approach current top proprietary models (probably a lot more for say Mythos or Mythos 2), and it's not like they are stoppng to improve. This is before we even account that you'd just be running 1 agent then, and not a swarm like you'd be able to in the cloud or that you can do only so much compression before you are losing out
UltraSane 3 hours ago [-]
Jevons Paradox shows that increasing efficiency can increase demand for a product by making it cost effective for more uses.
3 hours ago [-]
bhouston 5 hours ago [-]
I wrote up a theoretical post here about LMM performance of a MacBook Pro with PIM memory:
Interesting read. Definitely hoping this works out so we can have cheap LLM machines at home
4 hours ago [-]
mr_toad 4 hours ago [-]
“ Each PIM block only has fast access to its locally attached DRAM bank. All other input data has to be brought in through the DRAM chip’s comparatively constrained external interface. PIM blocks can’t directly exchange data with each other, so the host has to move data using regular DRAM reads and writes if one PIM block needs to use results generated by another.”
So how big are these banks? If you can’t fit the weights of a layer into one bank then presumably you lose a lot of the speed gains.
londons_explore 4 hours ago [-]
Not necessarily. If your weights have to go across 2 banks, you just have to split and transfer the input and output vectors, which are much smaller.
2 hours ago [-]
imtringued 4 hours ago [-]
For GEMV you lose nothing.
The reason is quite simple. You can split the matrix along both dimensions so you just tile it into 64x64 or whatever fits into the bank and just fill it up. The biggest problem is load balancing the tiles across all banks for maximum parallelism.
For GEMM I believe there is no point in doing PIM, you are better off with a GPU or NPU.
plywoodShadow 4 hours ago [-]
What about energy consumption? Wouldn't active cooling be needed for RAM as well as for CPU and GPU?
topspin 2 hours ago [-]
The better question is: what is the net gain for the overall system? If PIM reduces the net thermal load and power consumption of the system for the same workload, then it’s a win regardless of where the heat sinks end up. The customers Samsung has in mind for this today are not limited to commodity designs. They’re using novel designs with each new hardware generation, so moving heat sinks around is not a deal-breaker.
...and it's been long enough now, that I can say there was an effort to implement this on standard x86 memory controllers and have the existing string instructions do so, back in the days of SDR SDRAM, but the tradeoffs weren't (yet) in favour.
PunchyHamster 4 hours ago [-]
that's not at all comparable, you're still paying memory latency and not getting any extra bandwidth
krater23 4 hours ago [-]
Self changing RAM and a complex way to interact with it in software. A new security nightmare is emerging.
intrasight 3 hours ago [-]
It doesn't suffer from the inherent security issues of the von Neumann architecture. Memory will only be data.
hham 3 hours ago [-]
memory plus memory bandwidth > GPU, this is the gist of it.
ginko 4 hours ago [-]
Feels like the most realistic/short-term way to make use of this would be to set up some barebones RTOS to run from CPU cache with the PIM memory being used for compute only and use the device as a network attached accelerator.
Torkel 6 hours ago [-]
[dead]
LogTrim 7 hours ago [-]
[flagged]
sehw 7 hours ago [-]
[dead]
johnnyApplePRNG 6 hours ago [-]
[flagged]
saejox 6 hours ago [-]
If we could buy a 64gb stick and run a 32b model with 30tps on it. This could sell
I think the Von Neumann bottleneck is mostly a feature. The fact that communication of information across distances is expensive should not be immediately assumed to mean that it is universally flawed to do this. You are paying for something when you use all those joules. I'd argue we are usually wasting our energy with regard to information communication (e.g., lighting up a network interface & copper because we couldn't be bothered to use SQLite), but other times this stuff is fundamentally required for practical solutions to exist.
Then, by simply asking for a special memory address you could have access to registers/regions within PID RAM that serve as a result region.
Let's say you would need to run a sum over megabytes of data like for accounting. You could just ask RAM to do it and load just the result. The bandwidth would could be 8x higher and software could stay the same.
Doing scalar operations, frequent dereferencing and similar would not get much peformance benefit in many cases, as loading and accessing CPU cache is often much faster. But simple vector operations over large data could be massive.
Having accelerators on RAM like for jpeg compression, audio decoding or mass data operations could be beneficial but you would need to be careful with heat dissipation.
Personally I'm a big fan of the "in-ram accelerator" idea especially for server space. Doing fuzzy search in RAM could be massive performance improvement.
https://arxiv.org/abs/2602.01827
Matrix multiplication involves getting every entry of the input and output matrices to be at the same multiplier at the same time. (Ie. N^2).
To do that, a lot of data movement needs to happen. Movement is the main thing - the multiplication and addition is a sideshow as far as energy and silicon space is concerned. You need a 'around the chip' ring shift register to pass every element of one matrix past every element of the other.
If AI really is going to eat all our jobs, then matrix multiplication in memory is almost a requirement.
what I find strange is the adoption of a standard synchronous dram interface. that's a horrible left over piece of architecture that severely constrains the applicability of this device. control flow on the dram side can't initiate any transactions on its own, or respond after work has been done - its like usb, except with a hard limit on the response.
that severely limits the utility of the in-memory processors to doing things like encryption and compression - but even then those impose delays that effect the consistency model across that interface.
How clear is that? The idea has been around for about 60 years, and many attempts made by people who thought the same thing. Maybe this time it'll be the future.
That being said, I am not sure what’s the killer application for this technology, and without such application adoption is unlikely.
Imagine (this is a fantasy pitch but potentially achievable for some use cases) wanting to run a larger llm and all you have to do is buy more RAM so it fits.
Sure, MACs are nice. However, unless there other, PIM-specific/optimal, algorithms, regular matrix multiplication algorithms like tiling-based won’t work here I think — how would the tile be shared? By doing read/write all the time?
Isn't this how it works today already? Granted you wanted to run it on RAM rather than VRAM.
According to the article/Samsung RAM dies inside can support way higher bandwidth than they expose, they're limited by external interface / bus width:
> Together, they can utilize the chip’s internal bandwidth across all 16 banks, which comes out to 614 GB/s. For comparison, regular DRAM accesses can hit two banks in parallel and max out at 76.8 GB/s.
And that's just for single 64-bit IC. So way faster and more power efficient.
Consumer platforms have been stuck at dual channel for decades; most of it I attribute to intentional product segmentation. I'm hoping that LLMs might change eventually for an upcoming consumer platforms; going to 4 channel would be really nice.
AI: "Sorry, all the hardware is made for running AI."
You have an eight socket server with 96 memory slots, you add 96x PIM memories into the server (optimistic), load all the LLM parameters or KV cache in RAM and exclusively let it perform GEMV and let it rip.
614 GB/s x 96 = 58,944 GB/s.
Alternatively, the memory is used for embedded inference tasks. You can now upgrade from the limited single or two digit MB SRAM accelerators to reasonably fast single digit gigabyte models. Without MoE you could reach 100 tokens per second with an 8B fp8 model on a single channel. With MoE you might break 500 tokens per second.
Build it, and they will come ;)
The question really is how soon we reach that tipping point, and whether it's before or after the current bubble runs out of steam for some other reason.
There's no such ought really. Even at current levels you'd need like a 100x gain from here to approach current top proprietary models (probably a lot more for say Mythos or Mythos 2), and it's not like they are stoppng to improve. This is before we even account that you'd just be running 1 agent then, and not a swarm like you'd be able to in the cloud or that you can do only so much compression before you are losing out
https://ben3d.ca/blog/m5-max-samsung-lpddr5-pim-650-tokens-p...
So how big are these banks? If you can’t fit the weights of a layer into one bank then presumably you lose a lot of the speed gains.
The reason is quite simple. You can split the matrix along both dimensions so you just tile it into 64x64 or whatever fits into the bank and just fill it up. The biggest problem is load balancing the tiles across all banks for maximum parallelism.
For GEMM I believe there is no point in doing PIM, you are better off with a GPU or NPU.
Add a new set of CPU instructions like “rep macb”
...and it's been long enough now, that I can say there was an effort to implement this on standard x86 memory controllers and have the existing string instructions do so, back in the days of SDR SDRAM, but the tradeoffs weren't (yet) in favour.